192.168.1.1 Setup and Default Login Guide
Complete guide on how to log into your router or modem at 192.168.1.1. View default usernames, passwords, and devices associated with 192.168.1.1.
What Is 192.168.1.1?
192.168.1.1 is a private IPv4 address — Private (RFC 1918) — 192.168.0.0/16. Private addresses are not routable on the public internet — they are used inside home and office networks behind a router that performs NAT (Network Address Translation).
Subnet Details
- Address class
- Private (RFC 1918) — 192.168.0.0/16
- CIDR prefix
- /24
- Subnet mask
- 255.255.255.0
- Network address
- 192.168.1.0
- Broadcast address
- 192.168.1.255
- First usable host
- 192.168.1.1
- Last usable host
- 192.168.1.254
- Total addresses
- 256
- Usable hosts
- 254
How to login to 192.168.1.1
Open your favorite web browser (Chrome, Firefox, Safari, Edge).
Type http://192.168.1.1 into the URL address bar at the top and press Enter.
A login prompt will appear. Find your device in the table below and try the default username and password combinations.
If you cannot connect, ensure you are connected to the router's WiFi network or via Ethernet cable.
Why Does My Router Use 192.168.1.1?
Most home routers ship with a default LAN IP address chosen by the manufacturer. 192.168.1.1 is a common default — when you plug in a router and connect a device, the router hands out IP addresses inside the same range using DHCP.
Different manufacturers prefer different defaults: many TP-Link, Linksys, and Netgear models use 192.168.1.1, while D-Link historically used 192.168.0.1 and many fiber ONTs use 192.168.100.1. The router's IP and the addresses it hands out always belong to the same private subnet.
You will not see 192.168.1.1 on the public internet. When you visit a website, the router rewrites the source address to your public IP (assigned by your ISP) and translates replies back to your internal device. This is how dozens of devices share a single internet connection.
Devices and Brands That Use 192.168.1.1
Based on our database, these brands ship devices configured with 192.168.1.1 as the default LAN address:
Devices using 192.168.1.1
| Brand | Model | Username | Password | Protocol |
|---|---|---|---|---|
| Aruba | Base Model | admin | admin | HTTP |
| Aruba | Controller | admin | admin | HTTP |
| Aruba | (web) | admin | admin | HTTP |
| Asus | Base Model | adsl | adsl1234 | HTTP |
| Asus | Base Model | (no password) | admin | HTTP |
| Asus | Base Model | admin | admin | HTTP |
| Asus | iKVM BMC (IPMI) | admin | admin | HTTP |
| Asus | Router | admin | admin | HTTP |
| Asus | (ssh) | admin | password | SSH |
| Asus | (ssh) | root | root | SSH |
| Asus | (ssh) | Admin | Admin | SSH |
| Asus | (ssh) | admin | admin | SSH |
| Aztech | backdoor � not in all f/w versions | isp | isp | HTTP |
| Aztech | Base Model | admin | admin | HTTP |
| Aztech | Base Model | isp | isp | HTTP |
| Aztech | Base Model | root | admin | HTTP |
| Cisco | Added by DPL admin. From | root | password | HTTP |
| Cisco | Aironet (ssh) | Cisco | Cisco | SSH |
| Cisco | Base Model | cisco | (no password) | HTTP |
| Cisco | Base Model | cmaker | cmaker | HTTP |
| Cisco | Base Model | ESubscriber | (no password) | HTTP |
| Cisco | Base Model | (no password) | letmein | HTTP |
| Cisco | Base Model | (no password) | (no password) | HTTP |
| Cisco | Base Model | praisenetwork | perfectpraise | HTTP |
| Cisco | Base Model | (no password) | _Cisco | HTTP |
| Cisco | Base Model | (no password) | public/private/secret | HTTP |
| Cisco | Base Model | End User | 7936 | HTTP |
| Cisco | Base Model | enable | (no password) | HTTP |
| Cisco | Base Model | root | password | HTTP |
| Cisco | Base Model | scpuser | scpuser | HTTP |
| Cisco | Base Model | UNITY_ | (no password) | HTTP |
| Cisco | Base Model | UOMNI_ | (no password) | HTTP |
| Cisco | Base Model | root | secur4u | HTTP |
| Cisco | Base Model | sa | (no password) | HTTP |
| Cisco | Base Model | uwmadmin | password | HTTP |
| Cisco | Base Model | wlse | wlsedb | HTTP |
| Cisco | Base Model | wlseuser | wlsepassword | HTTP |
| Cisco | Base Model | (no password) | cisco | HTTP |
| Cisco | Base Model | (no password) | riverhead | HTTP |
| Cisco | Base Model | EAdmin | (no password) | HTTP |
| Cisco | Base Model | (no password) | Cisco router | HTTP |
| Cisco | Base Model | bbsd-client | (no password) | HTTP |
| Cisco | Base Model | (no password) | Cisco | HTTP |
| Cisco | Base Model | admin | admin | HTTP |
| Cisco | Base Model | admin | cisco | HTTP |
| Cisco | Base Model | public ReadOnly access | secret | HTTP |
| Cisco | Base Model | root | Cisco | HTTP |
| Cisco | Base Model | (no password) | cable-docsis | HTTP |
| Cisco | Base Model | CISCO15 | otbu+1 | HTTP |
| Cisco | Base Model | bbsd-client | changeme2 | HTTP |
| Cisco | Base Model | (no password) | cc | HTTP |
| Cisco | Base Model | netrangr | attack | HTTP |
| Cisco | Base Model | pnadmin | pnadmin | HTTP |
| Cisco | Base Model | Cisco | Cisco | HTTP |
| Cisco | Base Model | (no password) | changeit | HTTP |
| Cisco | Base Model | hsa | hsadb | HTTP |
| Cisco | Base Model | bubba | (unknown) | HTTP |
| Cisco | Base Model | admin | (no password) | HTTP |
| Cisco | Base Model | guest | (no password) | HTTP |
| Cisco | Base Model | UAMIS_ | (no password) | HTTP |
| Cisco | Base Model | UVPIM_ | (no password) | HTTP |
| Cisco | Base Model | bbsd-client | NULL | HTTP |
| Cisco | Base Model | technician | 2 + last 4 of Audio | HTTP |
| Cisco | Base Model | admin | tsunami | HTTP |
| Cisco | Base Model | ripeop | (no password) | HTTP |
| Cisco | Base Model | Administrator | admin | HTTP |
| Cisco | Base Model | Administrator | changeme | HTTP |
| Cisco | Base Model | admin | default | HTTP |
| Cisco | Base Model | private ReadWrite access | secret | HTTP |
| Cisco | Base Model | root | attack | HTTP |
| Cisco | Base Model | enable | cisco | HTTP |
| Cisco | Base Model | (no password) | ILMI | HTTP |
| Cisco | Base Model | admin | localadmin | HTTP |
| Cisco | Base Model | admin | changeme | HTTP |
| Cisco | Base Model | admin | diamond | HTTP |
| Cisco | Base Model | cisco | cisco | HTTP |
| Cisco | Base Model | root | blender | HTTP |
| Cisco | Base Model | (no password) | c | HTTP |
| Cisco | Collaboration Endpoint (general) | cisco | admin | HTTP |
| Cisco | Guard (snmp) | (no password) | riverhead | HTTP |
| Cisco | (IPMI) | admin | password | HTTP |
| Cisco | (ssh) | cisco | cisco | SSH |
| Cisco | (ssh) | pix | cisco | SSH |
| Cisco | Systems (general) | cisco | cisco | HTTP |
| Cisco-Arrowpoint | Base Model | admin | system | HTTP |
| Grandstream | Base Model | admin | 1234 | HTTP |
| Grandstream | Base Model | Administrator | admin | HTTP |
| Grandstream | Base Model | End User | 123 (or blank) | HTTP |
| Grandstream | Base Model | (no password) | admin | HTTP |
| Grandstream | Base Model | admin | admin | HTTP |
| Grandstream | Networks, Inc | admin | admin | HTTP |
| Grandstream | Networks, Inc | End User | 123 | HTTP |
| Grandstream | (web) | admin | admin | HTTP |
| Linksys | Base Model | user | tivonpw | HTTP |
| Linksys | Base Model | Administrator | admin | HTTP |
| Linksys | Base Model | admin | admin | HTTP |
| Linksys | Base Model | (no password) | (no password) | HTTP |
| Linksys | Base Model | (no password) | admin | HTTP |
| Linksys | Base Model | admin | (no password) | HTTP |
| Linksys | Base Model | (no password) | epicrouter | HTTP |
How to See Other Devices on the 192.168.1.1 Network
- Windows: On Windows, open Command Prompt and run arp -a to list every device your computer has recently talked to, along with their IP and MAC addresses.
- macOS / Linux: On macOS or Linux, run arp -a in Terminal. For a deeper scan you can use nmap -sn 192.168.1.0/24 (replace the range to match your subnet).
- iOS / Android: On iOS and Android, install a free network scanner such as Fing. It walks the local subnet and shows every connected phone, laptop, smart TV, and IoT device.
- Router admin: Inside the router admin panel itself, look for "DHCP Clients", "Connected Devices", or "Device List". Most routers show every active lease with its hostname and MAC address.
How to Change Your Router's IP from 192.168.1.1
Changing the router LAN IP is useful when two networks overlap (for example, when bridging a home network into an office VPN). Before starting, note your current IP — you will need to log back in afterward.
- Log into the router admin panel using 192.168.1.1 and the default credentials from the table above.
- Navigate to "LAN", "Network Settings", or "Local Network" in the side menu.
- Change the LAN IP (for example, from 192.168.1.1 to 192.168.5.1) and update the DHCP range so it stays inside the new subnet.
- Save the settings. The router will reboot. Reconnect to the Wi-Fi and use the new IP to log back in.
After changing the LAN IP, the previous 192.168.1.1 address will no longer reach the admin panel. Bookmark the new address.
Subnet Calculator
Enter an IPv4 address and CIDR prefix to compute the network details.
- Subnet mask
- 255.255.255.0
- Network address
- 192.168.1.0
- Broadcast address
- 192.168.1.255
- First usable host
- 192.168.1.1
- Last usable host
- 192.168.1.254
- Total addresses
- 256
- Usable hosts
- 254
Related IP Addresses
Other commonly used IPs in the same 192.168.1.x subnet:
Your IP Address Is Exposed Right Now
Every website you visit can see your real IP address and location. NordVPN encrypts your traffic and hides your identity with military-grade encryption. Stay anonymous online.